Wesgo Metals Materials Selector
Melt-Spun Foil, Non- Precious Brazing Filler Metals and Active Brazing
Filler Metals
Instructions
Click on the Wesgo Metals material name and characteristics will display
in the relevant boxes.
For further information or discussion with an Applications Engineer,
Please CONTACT
US NOTE: Select 'Landscape' format if you wish to print these results.
Zn – Less than .001% Cd– Less than .001% Pb – Less than .002% P - Less than .002% C - Less than .005%
Impurity
Limits – All other metallic impurities having a
vapor pressure higher than 10-7 mm Hg at 500°C are
limited to .002% each. Impurities having a vapor
pressure lower than 10-7 mm Hg at 500°C are limited
to a total of .050%.
(Applicable to all forms except
powder and extrudable paste).
DISCLAIMER
Reasonable care has been taken in the
preparation of the information contained in
the Material Selectors and the information
provided is given in good faith. However,
Wesgo Metals & Morgan Advanced Ceramics
assumes no responsibility as to the accuracy
or suitability of such information and no
warranty, expressed or implied, is made.
